KM Coal, oil and gas-phase drying equipment
Overview
KM Series of coal, oil and gas phase drying equipment is the use of kerosene heating evaporation under vacuum condition, become hot keros- ene evaporates, met lower-temperature condensation of the workpiece in the vacuum tank, releasing latent heat of condensation (306.6KJ/KG)And heating of the body. Condensation paraffin is collected through fuel delivery system back into the evaporator, heat evaporation again, and so many times, operating temperatures continue to rise, water constantly ev- aporates into water vapor, is drained by vacuum system, and ultimately achieve the goal of completely dry.KM Series of coal, oil and gas-phase drying equipment to fuel thesteam for heat transfer fluids, convective heat and condensation heat tra- nsfer in vacuum and low temperature condensed the more intense the heat more, therefore the body temperature uniformity.
Main technical characteristics
1 ,Control system of coal, oil and gas equipment of our company has stable and reliable operation, high efficiency equipment,
reasonable layout, modular design, ease of maintenance features .
2 ,Built-in waterfall evaporator, possible in the midst of heated stage distillation, distillation, heating of the product at the same
time, energy-saving, safe. | |
3 , Cans set up separate waste heat recovery, you can maximize the use of energy, conservation of energy.
4 , Timely records of each intermediate pressure water and total water on the touch display . Achieving draws each time the
pressure of water in the Middle curve and curve of total water; and automatic calculation every time middle relief for water rates.
5,Real time measurement of condensation paraffin flow in mixed gas, and accurate control of valve opening, rather than com-
pletely depend on the tank pressure control, which makes the control more energy-efficient. | |
6 , Computer-automated endpoint determination, when the product temperature 120 ℃± 5 ℃, Pressure vacuum tank ≤ 0.2MBAR,
And when the water rate is less than the set requirements, the program automatically interrupts the process
7 , Kit selection of domestic and foreign famous brand products processed by vacuum industry standard specification and the rele-
vant national machinery manufacturing standards for designing and manufacturing test, improve safety, versatility and interchangea-
8 ,Computer monitor process and display parameters and curve, can print a variety of process curves or reports in real time,
automatically processing data backup process .
Control system has a user friendly interface, screen, can reflect the running state and process in real time .
10 ,Automatic alarm sound and light signals, and provides general troubleshooting methods, can record points of failure and
failure time and other parameters. | |
11 ,Suddenly powered down to save the various parameters and procedures to perform State functions.
12 , Modular design of the main parts of the system, to provide system installation reliability and quality.
PARAMETER:
| NO | Model | Dry tank size mm | Electric power | Maximum operating temperature | Control accuracy | Limited vacuum | Control mode | |
| 1 | KM-7000 | 7000X4500X4500 | 250KW | 135±5℃ | ±5 | ≤ | Touch screen |
| 2 | KM-9000 | 9000X4500X4500 | 300KW | 135±5℃ | ±5 | ≤ | Touch screen |
| 3 | KM-10000 | 10000X5000X5000 | 400KW | 135+5 | ±5 | ≤ | Touch screen |
| 4 | KM-11000 | 11000X5000X5000 | 400KW | 135±5℃ | ±5 | ≤ | Touch screen |
| 5 | KM-12000 | 12000X5500x5500 | 400KW | 135±5℃ | ±5 | ≤ | Touch screen |
FAQ:
1. Q: What does "FOB""CFR"and "CIF"Mean?
A: FOB=free on board with China loading port
CFR=CNF=cost and freight charge with destination port
CIF=CFR+Insurance with destination port
2. Q: What's consists of equipment for your APG whole production line?
A: APG Machine-APG Mold-Curing Oven-Air compressor-Mixing Material-Release Mould Agent- Xylene germicides.
3. Q:What information do we need before quote?
A: Your product's diameter and photo or drawing.
4. Q: How about your installation & debugging and after-sale service?
A: Our engineer go to the oversea for the installation and debugging availably,and we provide one-stop sevice and machines lifelong maintenance.On site test and inspection available.
5. Q: How about your experience in this field?
A: We have 24 years experience in this field.Until now,we have 19 items patents.
6. Q: Is it one-stop service company in electric power equipment industry?
A: Yes,Oyr products cover APG Clamping Machine,APG Molds & Injection Toroidal Winding Machine (CT & PT),Transformer Foil Winding Mach Molds,Marking Machine.
7. Q: What is your delivery time?
A: It takes around 50 working days.
8. Q:How's the packing way?
A:The machine with plastic film and others parts use wooden case for safety.
9. Q: What's the shipping port?
A: Shanghai,Shenzhen,Ningbo,Qingdao etc.
10. Q: What's the payment terms?
A: Telegraphic transfer(TT),Letter of credit.
Product Tags:
|
|
KM Coal Oil And Gas Phase Drying Equipment Vacuum Impregnation Equipment Images
|
